Pop-Up Wall Spill Containment Berm, 14′ x 54′ x 12″, 5,650 Gal.

The Pop-Up Wall Spill Containment Berm (14 ft x 54 ft inside, 12 in. walls) holds up to 5,650 gallons of spilled liquid for secondary containment.

Rigid side walls snap up in seconds with no tools, creating a containment area for equipment, drums and fluid transfers. It folds flat for transport and storage between uses.

Inside it measures 14 ft wide by 54 ft deep with 12-inch walls and holds up to 5,650 gallons. It weighs about 352 lb. It helps facilities meet EPA 40 CFR 112.7 and SPCC secondary containment rules.

Good for

• Fuel trucks, tankers and mobile refueling
• Generators, compressors and heavy equipment
• Drum and tote staging areas
• Vehicle maintenance and wash bays
• Frac sites, job sites and emergency spill response

Specifications

Questions and answers

How much does the Pop-Up Wall Spill Containment Berm hold?

Up to 5,650 gallons, with 12 in. walls.

How do I size a containment berm?

Find the largest tank, tote or vehicle compartment that will sit in the berm. SPCC rules require the berm to hold that full volume plus room for rain, and a common rule of thumb is at least 110% of the largest container. Pick a berm whose capacity meets that number.

What about rainwater in the berm?

Rain collects in an outdoor berm and uses up capacity, so check it after storms and remove clean water. A berm bailer or drain lets you remove water in a controlled way; never drain water that has a sheen.

Do I need a ground mat?

A ground mat or tarp under the berm protects the floor from rocks, rebar and rough ground, and track guards protect it where tires roll in. Both are in our Berm Accessories category.