Foam Wall Containment Berm, 12′ x 50′ x 4″, PVC, 1,496 Gal.
$2,675.97
- Inside size: 12′ x 50′
- Wall height: 4″
- Holds up to 1,496 gallons
- 22 oz, 24 mil PVC
- Foam walls pop up on their own
- Drive in and out, no ramps
- Free shipping to the lower 48 states
Our Clean Promise
| Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States| Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States
product description
The Foam Wall Containment Berm (12 ft x 50 ft inside, 4 in. walls) holds up to 1,496 gallons of spilled liquid for secondary containment and is made of 22 oz, 24 mil PVC.
These berms have closed-cell foam walls that spring up on their own when you unroll the berm and flatten under tires, so vehicles, carts and forklifts can drive straight in and out with no ramps. Set one under generators, compressors, trucks or drum groups to catch leaks and spills.
Inside it measures 12 ft wide by 50 ft deep with 4-inch walls and holds up to 1,496 gallons. It is made of 22 oz, 24 mil PVC, a durable, lower-cost material that handles petroleum products, hydraulic fluid and common chemicals. It weighs about 149.9 lb. It helps facilities meet EPA 40 CFR 112.7 and SPCC secondary containment rules.
Good for
- Fuel trucks, tankers and mobile refueling
- Generators, compressors and heavy equipment
- Drum and tote staging areas
- Vehicle maintenance and wash bays
- Frac sites, job sites and emergency spill response
Specifications
| Inside size (W x L) | 12 ft x 50 ft |
|---|---|
| Width | 12 ft (inside) |
| Depth | 50 ft (inside) |
| Wall height | 4 in. |
| Capacity | 1,496 gallons |
| Material | 22 oz, 24 mil PVC |
| Weight | About 149.9 lb |
| SKU | C8464U |
| Mfr. part # | 8464 |
Questions and answers
How much does the Foam Wall Containment Berm hold?
Up to 1,496 gallons, with 4 in. walls.
How do I size a containment berm?
Find the largest tank, tote or vehicle compartment that will sit in the berm. SPCC rules require the berm to hold that full volume plus room for rain, and a common rule of thumb is at least 110% of the largest container. Pick a berm whose capacity meets that number.
Can vehicles drive into it?
Yes. The foam walls flatten under tires and spring back up, so vehicles, carts and forklifts drive straight in and out with no ramps.
What liquids can it hold?
PVC handles petroleum products, hydraulic fluid and common chemicals at a lower cost. For aggressive chemicals or long-term fuel exposure, choose a Copolymer-2000 model.
What about rainwater in the berm?
Rain collects in an outdoor berm and uses up capacity, so check it after storms and remove clean water. A berm bailer or drain lets you remove water in a controlled way; never drain water that has a sheen.
Do I need a ground mat?
A ground mat or tarp under the berm protects the floor from rocks, rebar and rough ground, and track guards protect it where tires roll in. Both are in our Berm Accessories category.
Documents & Downloads
Need a Safety Data Sheet (SDS) or another document? Call (800) 869-9633 and we’ll send it.
| Weight | 149.9 lbs |
|---|---|
| Containment Capacity | 500–2,000 gal |
| Application | Shop & Industrial |
| Pack Size | Single |










Reviews
We’re still collecting reviews for this product. In the meantime, here’s what verified buyers say about other products they bought from CleanUp Stuff.