Aluminum Bracket Containment Berm, 10′ x 10′ x 12″, 748 Gal.
$1,099.97
- Inside size: 10′ x 10′
- Wall height: 12″
- Holds up to 748 gallons
- Copolymer-2000
- Rigid aluminum bracket walls
- Folds flat for storage
- Free shipping to the lower 48 states
Our Clean Promise
| Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States| Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States | Fast & Free Shipping To Lower 48 States
product description
The Aluminum Bracket Containment Berm (10 ft x 10 ft inside, 12 in. walls) holds up to 748 gallons of spilled liquid for secondary containment and is made of Copolymer-2000.
Rigid aluminum brackets hold up the 12-inch walls, and they can be lowered so forklifts and wheeled equipment can drive over the edge. A sturdy choice for larger equipment, multi-drum storage and vehicle maintenance. It folds flat between jobs.
Inside it measures 10 ft wide by 10 ft deep with 12-inch walls and holds up to 748 gallons. It is made of Copolymer-2000, which stands up to fuels, oils, solvents and many aggressive chemicals. It weighs about 52 lb. It helps facilities meet EPA 40 CFR 112.7 and SPCC secondary containment rules.
Good for
- Fuel trucks, tankers and mobile refueling
- Generators, compressors and heavy equipment
- Drum and tote staging areas
- Vehicle maintenance and wash bays
- Frac sites, job sites and emergency spill response
Specifications
| Inside size (W x L) | 10 ft x 10 ft |
|---|---|
| Width | 10 ft (inside) |
| Depth | 10 ft (inside) |
| Wall height | 12 in. |
| Capacity | 748 gallons |
| Material | Copolymer-2000 |
| Weight | About 52 lb |
| SKU | C8252U |
| Mfr. part # | 8252 |
Questions and answers
How much does the Aluminum Bracket Containment Berm hold?
Up to 748 gallons, with 12 in. walls.
How do I size a containment berm?
Find the largest tank, tote or vehicle compartment that will sit in the berm. SPCC rules require the berm to hold that full volume plus room for rain, and a common rule of thumb is at least 110% of the largest container. Pick a berm whose capacity meets that number.
Can vehicles drive into it?
Yes. Lower the aluminum brackets on one side and forklifts or wheeled equipment can drive over the wall; raise them again for full containment.
What liquids can it hold?
Copolymer-2000 stands up to fuels, oils, solvents and many aggressive chemicals. For strong acids or unusual chemicals, call (800) 869-9633 and we will confirm compatibility.
What about rainwater in the berm?
Rain collects in an outdoor berm and uses up capacity, so check it after storms and remove clean water. A berm bailer or drain lets you remove water in a controlled way; never drain water that has a sheen.
Do I need a ground mat?
A ground mat or tarp under the berm protects the floor from rocks, rebar and rough ground, and track guards protect it where tires roll in. Both are in our Berm Accessories category.
Documents & Downloads
Need a Safety Data Sheet (SDS) or another document? Call (800) 869-9633 and we’ll send it.
| Weight | 52 lbs |
|---|---|
| Containment Capacity | 500–2,000 gal |
| Application | Shop & Industrial |
| Pack Size | Single |










Reviews
We’re still collecting reviews for this product. In the meantime, here’s what verified buyers say about other products they bought from CleanUp Stuff.