Compact Containment Berm, 10′ x 10′ x 12″, 748 Gal.

The Compact Containment Berm (10 ft x 10 ft inside, 12 in. walls) holds up to 748 gallons of spilled liquid for secondary containment and is made of Copolymer-2000.

A durable, flat-folding berm with 12-inch walls for equipment, wash areas and maintenance operations. It packs down small for storage and shipping to remote sites but is tough enough to stay in place as permanent containment.

Inside it measures 10 ft wide by 10 ft deep with 12-inch walls and holds up to 748 gallons. It is made of Copolymer-2000, which stands up to fuels, oils, solvents and many aggressive chemicals. It weighs about 72 lb. It helps facilities meet EPA 40 CFR 112.7 and SPCC secondary containment rules.

Good for

• Fuel trucks, tankers and mobile refueling
• Generators, compressors and heavy equipment
• Drum and tote staging areas
• Vehicle maintenance and wash bays
• Frac sites, job sites and emergency spill response

Specifications

Questions and answers

How much does the Compact Containment Berm hold?

Up to 748 gallons, with 12 in. walls.

How do I size a containment berm?

Find the largest tank, tote or vehicle compartment that will sit in the berm. SPCC rules require the berm to hold that full volume plus room for rain, and a common rule of thumb is at least 110% of the largest container. Pick a berm whose capacity meets that number.

What liquids can it hold?

Copolymer-2000 stands up to fuels, oils, solvents and many aggressive chemicals. For strong acids or unusual chemicals, call (800) 869-9633 and we will confirm compatibility.

What about rainwater in the berm?

Rain collects in an outdoor berm and uses up capacity, so check it after storms and remove clean water. A berm bailer or drain lets you remove water in a controlled way; never drain water that has a sheen.

Do I need a ground mat?

A ground mat or tarp under the berm protects the floor from rocks, rebar and rough ground, and track guards protect it where tires roll in. Both are in our Berm Accessories category.