UltraTech IBC Spill Pallet, 2 Unit Poly Platform 124.5×61-5/8×22 inches 1 Left Side Shelf Drains to Sump No Fork Pocket/Drain

This UltraTech 2-tote IBC spill pallet holds two IBC totes side by side over one shared 535-gallon containment sump, enough to capture the full contents of either tote if it fails.

The 124.5 x 61.6 inch polyethylene platform supports 8,000 lbs per side, will not rust, and resists oils, acids, caustics and most chemicals. A factory-installed bucket shelf on the left side holds a 5-gallon pail while you dispense, and drips from the shelf drain straight into the sump.

With 535 gallons of sump capacity it can hold the full contents of a 330-gallon or 275-gallon IBC tote, which meets the EPA 40 CFR 264.175 sizing rule and supports an SPCC plan.

Good for

• 275- and 330-gallon IBC totes of chemicals, oils or coolants
• Tote dispensing stations in plants and warehouses
• Agricultural chemical and fertilizer storage
• Water treatment and cleaning chemical storage

Specifications

Questions and answers

How much liquid does the UltraTech IBC Spill Pallet hold?

The sump holds 535 gallons. It is sized for two totes.

Does it meet EPA secondary containment requirements?

Yes. The 535-gallon sump holds more than the largest container on it, which is what the EPA 40 CFR 264.175 rule requires for a standard IBC tote. Your SPCC plan or local inspector has the final say for your site.

Does it have a drain plug?

No. This model has no drain, so everything you catch stays contained until you pump it out. A version with a drain plug is available if you need one.

Can I move it with a forklift?

It has no fork pockets. Position it empty, then load it in place.

Can I use it outdoors?

Yes, but rain will collect in an open sump and use up containment capacity. Under a roof or with a cover is best.

What size IBC totes fit?

It fits standard 275- and 330-gallon IBC totes.

Ships free to the lower 48 states. Questions about fit or compliance? Call (800) 869-9633.